How to create a flat piece on the Knifty Knitter
  1. Cast on the loom as described in the instructions (see Provo video) by looping thread around post on front and then going behind, around to front, back toward post, across back and to the next post. Go all the way around the loom and attach to post. Do not go over the first looped post.Push all the loops down. |
 2. Bring the yarn over the front side of the last peg wrapped. |
 3. Go behind the next peg and wrap it. |
|
 4. Wrap the rest of the pegs in this fashion (see step 1.) |
 This is how it would look fom the front, notice they do not connect. |
 Pull the bottom loop over the top one. |
 Repeat this all the around, push the loops down and repeat from step 2 until desired length is achieved. |